The Sliger SM550 manual says it comes with three types of screws. Mine came with four (or five).
Normally I’d say “Extra screws are better than not enough screws.” And maybe Sliger ships the same multi-compartment baggy of screws with all their case models.
But the problem is, there’s at least one screw in the manual that matches no screw in the baggy. And that’s a problem.
Apparently other boutique PC cases have similar problems with incomplete or out of date manuals. If that’s true, Sliger gets no points for standing out from the crowd.
Green M3 Pan Head — matches the manual. 12x. For PCIe cards. Red M3 Flat Head. 4x. Chassis top assembly was held in place with these screws. Matches the picture in the manual. For SSDs? 14x. The SM550 can hold two by default, and more with a bracket. Red M3 Flat Head? 3x. Longer than the picture in the manual. Like the screws that held the top in place, but longer. For Rear AC Inlet only? Phillips Indented Hex Head m3.5 — I think. 12x. Probably takes the place of the “Violet M3.5 Truss Head,” and is for the motherboard and power supply. Screws that came with my SM550
